[FBO-10-HTR]Parker Racor FBO UNIT ASSEMBLY

FBO assemblies are specifically designed to meet the filtration requirements of today’s high pressure common-rail diesel injection systems. The unit is used for fuel dispensing pumps or as a primary fuel filter/water separator on large diesel engine applications.

FBO-10 and FBO-14 filter assemblies were designed to meet the toughest conditions and offer ease of filter change outs. The FBO assembly can flow from 10 GPM (38 LPM) to

75 GPM (284 LPM)- depending on which model- filter- and type of fuel to be filtered.

The assembly features a “locking ring collar”- which attaches the filter housing to the aluminum die cast filter head with four bolts. The slotted “locking ring collar” allows maintenance personnel to hand loosen the four collar bolts- rotate- and lower the bowl assembly for filter

changeouts.

With a new filter cartridge installed- simply raise the bowl and rotate into position on the locking ring and hand tighten evenly (evenly torquing the 4 closure bolts to 100 lb-in is highly recommended).

The closure hardware consists of stainless steel nuts- bolts- and washers with metal hand knobs for ease of maintenance. No wrenches or other special tools are required- allowing one person to easily change the filter cartridge (no V-band clamps are used).